304 stainless steel elbow, in the pipeline system, connect two pipes with the same or different nominal diameters to make the pipeline bend at a certain angle.
Elbow flanges, as a device that can effectively connect two pipes or pipe fittings together, are basically required by some processing places. Of course, they will be fixed to an elbow flange first during the connection process. Then add a cushion between the two pipe fittings and bolt them together, which can complete the most effective connection. Of course, some housekeeper pipe fittings still have their own flanges. In this case, it is itself It also belongs to the connection between the flange and the elbow.
If you are not particularly familiar with such an elbow flange part, then everyone must pay attention to it. The flange cannot be stored for a long time. It must be checked regularly, and a series of exposed places are often carried out. For cleaning, it is necessary to ensure that it is exposed to the outside without any pollution, and it is best to maximize its cleanliness, remove dirt, and store it neatly indoors. Keep the room dry and ventilated. It is strictly forbidden to stack it in the open air.
In the process of using the flange, generally speaking, it is only fully open or fully closed, and the entire adjusted flow is not allowed. At the same time, it will avoid the enrichment of the cover and will continue to accelerate the wear. His materials are relatively It is more convenient to say, the manufacturing is also very simple, the cost is particularly low, and it will be very extensive in the process of use, but its rigidity is relatively poor, so it cannot be used in a series of processes and explosive objects. At the same time, he also has a series of chemical processes and high system matching, which may harm some occasions, so be sure to check it comprehensively during use.